Programmable
Digital Temperature Indicator and Data Logger Doric 5000
Series of single and multiple channel digital temperature
indicators sets a new standard for performance, features,
value and reliability. With built-in programmability,
RS232 serial communications and powerful Windows-based
software, the Doric 5000 is ideal for monitoring, testing
and process control
applications.
Complete configuration of the instrument can be quickly
performed from the front panel, including sensor input
type, sampling rate, limit settings, and resolution. Current
value and min/max values can be selected for display from
the front panel.
Thanks to its exclusive Viewer software, the Programmable
Digital Temperature Indicator and Data Logger Doric 5000
Series becomes a powerful PC-based data gathering, display
and logging system. All front panel setup commands can
be executed from your PC and all channel data, limit/alarm
status and min/max values can be viewed simultaneously.
In addition, you can label channel data, perform engineering
unit calculations, log data and create exportable data
files.
With the multiple inputs option installed,
the Programmable
Digital Temperature Indicator and Data Logger Doric 5000
Series provides simultaneous
monitoring of up to six thermocouple or three RTD channels.
On single input models,
an optional board may be installed which provides enhanced
alarm functions as well as a scalable, linearized 4-20ma/0-10V
analog output.
Multiple Inputs
Instead of the dual
alarm/analog output option, the Programmable
Digital Temperature Indicator and Data Logger Doric
5000 Series can
be configured to accept up to six thermocouples or three
platinum RTDs.
All active inputs can
be manually selected or automatically scanned. A front
panel
channel indicator accompanies the displayed data. Individual
limits can be assigned
to each channel. A built-in 5A rated form-C relay is
energized whenever the limit on
the selected channel is exceeded.
Analog Output
Analog output capability
is also available in combination with the dual alarm
option.
A linearized output (4-20mA or 0-10V) with fully adjustable
zero and span allows the
instrument to serve as an indicating transmitter for
a proportional controller,
high-level input to a PC-based data converter or other
recording device.
Dual Alarms
With the dual alarm
option installed, the Programmable
Digital Temperature Indicator and Data Logger Doric
5000 Series can
be configured to perform on/off control functions as
well as process monitoring. Setpoints can be set for
high, low or deviation. In addition, hysteresis (deadband)
and delay can be programmed into each setpoint. Alarm
conditions can be programmed for manual acknowledgment
or for automatic reset. The dual alarm option comes
equipped with two 5A rated form-C (NO/NC) relays, one
for each alarm setpoint and flashing display whenever
an alarm condition exists.
Features:
• Fully Programmable and Easy to Use
• 4-Digit Alphanumeric Display
• RS232 Serial Port (standard)
• Captures Min and Max Readings
• 6 Thermocouple Types / 2 RTD Types
• Selectable 0.1°/1° Resolution; °F/°C
• Scalable Analog Output Option
• Dual Alarm Option
• Multiple Input Option
5000 Indicator/Data Logger
