Kaman
Instrumentation’s Multi-VIT Displacement Measuring
System, the KD-2300, is a noncontact linear proximity
measuring system.This easy-to-use system makes high precision
static and dynamic measurements for product design, fabrication,
process control, and inspection of metal objects. It replaces
LVDTs, air gauges, dial indicators, and micrometers.
The Displacement Measuring System Kaman KD2300 includes
a sensor, power and output cable, and signal conditioning
electronics package. Zero, gain,and linearity adjustments
are provided on the electronics package.The output voltage
of the system is proportional to the distance between
the face of the sensor and any metallic (conductive) target.
Depending upon the system, the standard sensor cable length
may be increased to a maximum of 30 feet (9.15 m). If
special sensor designs or improved system performance
are required, contact an Intertechnology Instrumentation
application engineer for assistance.
Certain internal components in the Displacement Measuring
System Kaman KD2300 family precisely match the signal
conditioning electronics to a specific sensor and cable.
To change the sensor size and/or cable length, a corresponding
bridge card must also change.This is an easy task, requiring
only a screw driver, that can be accomplished in a matter
of minutes.
Contact Intertechnology for the type of sensor/cable conversion
you wish to make.
Features:
• Multi-Purpose Variable Impedance Transducer (Multi-VIT)
is a displacement measuring system
• Economical single-channel units
• Long-term stabilityand repeatability
• Measuring range from 0.020 to 2.0 inches
• Resolution better than 0.01% of measuring range
• Linearity better than ±0.5 to ±1% measuring range
• Frequency response to 50 kHz
Displacement Measuring System
Kaman KD2300
|
