Kistler,Model,8305A,K-Beam,Capacitive,Accelerometer,Series

Kistler Model 8305A K-Beam® Capacitive Accelerometer Series

 

  Our Products

 Instrumentation
 Monitoring/Display
 Signal Conditioning


 Stress Analysis
 Strain Gauges


 Transducers
 Load/Torque Cells
 Displacement
 Pressure

 Data Acquisition

 Vibration
 Accelerometers
 Analysis


 Physical Testing
 Material/Composite
 Fatigue/Durability
 Physical


 Environmental Test
 Chambers

 



      
  Our Manufacturers
 Ashcroft
 Capacitec
 Celesco
 Chart
 Cincinnati Sub_Zero
 Data Physics
 Data Track
 Doric
 Ectron
 GP:50
 Honeywell
 Kaman
 Kistler
 Lebow Products
 Michigan Scientific
 Morehouse
 Non-Linear Devices
 Revere Transducers
 Sensortronics
 SRI PMD
 Strainsert
 Tedea-Huntleigh
 Tovey
 Trans-Tek
 Unipulse
 Vishay Measurements
 Group
 
  Kistler Model 8305A K-Beam® Capacitive Accelerometer Series
The 8305A K-Beam accelerometer series utilizes a three layer silicon micro-machined variable capacitance sensing element designed for measurements of low level acceleration in a steady state or low frequency environment. They are fully calibrated sensors with all excitation and signal conditioning electronics integrated into a single package. K-Beam accelerometers provide a high level output signal with excellent long-term stability. They are insensitive to thermal transients and transverse acceleration.

The 8305A(X) standard configuration, provides the convenience of a single polarity power supply and a single-ended output. A 2.5 volt offset is present at 0g. The 8305A(X)M4 and 8305A(X)M7 versions add a 4-point (pos. and neg. respectively) connector to the cable end of the standard 8305A. The 8305A(X)M2 versions, operate from a single polarity supply and provides a differential output. When connected to a different amplifier, the offset at 0g is nominally 0 volts.

Power can be furnished from a regulated DC power supply or from a 9-volt alkaline battery. The K-Beam accelerometers are available either in a standard 0.5 meter length or in a user specified cable length. The 8305A series accelerometers are housed in a sturdy, environmentally protected, anodized aluminum case with mounting flanges.

• Small, lightweight variable capacitance sensing element
• Frequency response: 0 ... 250 Hz
• Operates from a 9 volt battery
• Patented K-Shear® design
• 8303 replacement with less than 1mA supply current
• Conforming to CE

Kistler Model 8305A K-Beam® Capacitive Accelerometer Series


 

Kistler Model 8305A K-Beam® Capacitive Accelerometer Series