|
|
|
|
Kistler Model 8704B...M10 PiezoSMART® Accelerometer
|
 The 8704B...M10 accelerometer can operate both
as a standard low impedance, voltage mode sensor with a conventional analog output signal or in a digital "PiezoSMART Sensor Mode"
capable of providing pertinent information stored with in its memory module. Since the design of the accelerometer confirms
to a universal standard (IEEE 1451.4), any commercially manufactured TEDS Signal Conditioner, along with a host computer, will
address and retrieve the stored information.
The PiezoSMART 8704 is ideally suited for multi-channel industrial
vibration monitoring, where the performance of a laboratory type sensor coupled with the convenience of having sensor
identification and specification readily available becomes an important test benefit. Kistler's field proven K-Shear design
ensures extremely low sensitivity to thermal transients, base strain and transverse acceleration. Quartz sensing elements
afford the ultimate in long-term stability for years of repeatable and accurate measurements.
A low impedance, voltage
output is provided by the embedded Kistler Piezotron® electronic impedance converter. This output allows for the use of inexpensive
coaxial cable, while providing high noise immunity and insensitivity to cable motion. The low impedance output is also desirable
for operation in a humid environment. The 8704M10 accelerometer series features a light weight titanium case, hermetically
sealed to withstand varied environmental conditions.
• Low impedance voltage mode
• Incorporates "TEDS" smart sensor technology
• Ultra-low base strain
• Low thermal transient response
• Lightweight, hermetically sealed titanium case
• Conforming to CE
Kistler
Model 8704B...M10 PiezoSMART® Accelerometer
|
|
