Ready-to-connect compact assembly kit with
integrated, single-component SlimLine (SLS) force sensors. 2, 3 or 4 ultra-fast quartz sensors are contained in a fixed
connection. Measurement of the total force or partial force per sensor can be made with an appropriate connecting cable.
The cable length of the sensors can be individually selected between 0.05 m and 2 m. The total force F to be measured is applied
to the sensors through special preloaded or fitted elements. Each loaded sensor produces an electric charge proportional
to its force component. The charge signals are fed out through electrodes and integrated cables.
The individual sensor
cables in the SL kit are connected premanently to a special 7-pole connector. The sensor signals in it are individually
fed to the corresponding pin positions. The further signal processing can be determined by an appropriate connecting cable.
As a result of their great rigidity, SlimLine sensors are particularly suitable for the measurement of rapidy changing forces.
Quasistatic measurements over several minutes are possible. The SL assembly is particularly suitable for the measurement
of forces in force shunt mode. This means that the sensors are embedded and preloaded in an/a environmental/surrounding
structure.
• Flexible, compact installation in structures
• Total or individual signals
• Cable length can be chosen for each sensor
• Sensors ground level
Ready-to-connect compact assembly kit with
integrated, single-component SlimLine (SLS) force sensors. 2, 3 or 4 ultra-fast quartz sensors are contained in a fixed
connection. Measurement of the total force or partial force per sensor can be made with an appropriate connecting cable.
