Kistler,Models,9301B,9312A,9322A,9332A,9342A,9352A,9362A,9372A,Quartz,High,Impedance,Charge,Mode,Force,Links

Kistler Models 9301B ... 9372A Quartz,
High Impedance, Charge Mode Force Links

 

  Our Products

 Instrumentation
 Monitoring/Display
 Signal Conditioning


 Stress Analysis
 Strain Gauges


 Transducers
 Load/Torque Cells
 Displacement
 Pressure

 Data Acquisition

 Vibration
 Accelerometers
 Analysis


 Physical Testing
 Material/Composite
 Fatigue/Durability
 Physical


 Environmental Test
 Chambers

 



      
  Our Manufacturers
 Ashcroft
 Capacitec
 Celesco
 Chart
 Cincinnati Sub_Zero
 Data Physics
 Data Track
 Doric
 Ectron
 GP:50
 Honeywell
 Kaman
 Kistler
 Lebow Products
 Michigan Scientific
 Morehouse
 Non-Linear Devices
 Revere Transducers
 Sensortronics
 SRI PMD
 Strainsert
 Tedea-Huntleigh
 Tovey
 Trans-Tek
 Unipulse
 Vishay Measurements
 Group
 
  Kistler Models 9301B ... 9372A Quartz, High Impedance, Charge Mode Force Links
The 9300 Series quartz force links measure dynamic and short-term static compression and tension forces with near infinite resolution. Extremely small forces throughout the total range can also be measured with great accuracy. Tension or compressive tare components may be eliminated prior to making measurements by simply activiting the reset switch function located on the charge amplifier.

The charge signal of the force link is transformed into an output voltage directly proportional to the applied force through the addition of a Kistler charge amplifier. Within limits, the resultant output voltage is independent of the length of the sensor output cable and has a maximum value of 10 volts. With the charge amplifier set on the most sensitive range, 0.1lbf/V can be obtained with sensors having -17pC/lbf. sensitivity. The negative charge output resulting from an increasing applied force is inverted when passing through a charge amplifier.

The force being measured acts on the load washer (M) via the two special nuts (AA and BB), which are preloaded by a preload bolt. Tension is measured as a decrease of the preload force. The quartz discs contained in the load washer transform the force to be measured into an electrostatic charge. The longitudinal piezoelectric effect is utilized. The connector is welded to the body. The cable connection can be sealed against adverse environment with a thermo-shrink sleeve.

• Compression and tension measurements
• High natural frequency and rigidity
• Dynamic and quasistatic events
• Coupling with mounting plate
• Easy to install

Kistler Models 9301B ... 9372A Quartz, High Impedance, Charge Mode Force Links


 

Kistler Models 9301B ... 9372A Quartz,
High Impedance, Charge Mode Force Links