Kistler Preloading

Our Products

Instrumentation
Monitoring/Display
Signal Conditioning

Stress Analysis
Strain Gauges

Transducers
Load/Torque Cells
Displacement
Pressure

Data Acquisition

Vibration
Accelerometers
Analysis

Physical Testing
Material/Composite
Fatigue/Durability
Physical

Environmental Test
Chambers

Our Manufacturers

Ashcroft
Capacitec
Celesco
Chart
Cincinnati Sub_Zero
Data Physics
Data Track
Doric
Ectron
GP:50
Honeywell
Kaman
Kistler
Lebow Products
Michigan Scientific
Morehouse
Non-Linear Devices
Revere Transducers
Sensortronics
SRI-PMD
Strainsert
Tedea-Huntleigh
Tovey
Trans-Tek
Unipulse
Vishay Measurements Group

Kistler Preloading

Kistler Set of Preloading Elements For Load Washers, Type 9420A01 ... 9420A71 The standardized preloading elements are used for mounting the load washers Types 9001A, 9071A.
Kistler Set of Preloading Elements, M20 x 1,5 – for Force Sensors, Type 9451… The standardized preloading elements are used for mounting the force sensors Types 9047B, 9048B with internal diameter of 14.1 mm.
Kistler Set of Preloading Elements For Force Sensors, Type 9455 The standardized preloading elements are used for mounting the multicomponent force sensors Types 907X with internal diameter of 40.5 mm.
Kistler Set of Preloading Elements, M26 x 0,75 – for Force Sensors, Type 9459 Standard preloading elements are used for mounting multicomponent force sensor Type 906X that have an internal diameter of 26.5 mm.
Kistler Set of Preloading Elements For Force Sensors, Type 9461, 9461sp The standardized preloading elements are used for mounting the quartz force sensors Types 9251A, 9252A, 9601A with internal diameter of 8.1 mm.
Kistler Set of Preloading Elements, M14 x 1,5 – for Force Sensors, Type 9465… The standardized preloading elements are used for mounting the force sensors Types 9047B, 9048B with internal diameter of 14.1 mm.