|
|
|
|
|
|
Kistler
Piezoresistive Amplifier, Type 4603B...
The microprocessor-controlled piezoresistive
amplifier Type 4603B... is mainly used with pressure sensors of the Types 4043A, 4045A, 4073A and 4075A for measuring in the range 1...
500 bar.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kistler
Charge Amplifier, Type 5011B...
The mains-operated, microprocessor
controlled one-channel charge amplifier Type 5011B converts the electrical charge yielded by piezoelectric sensors into a
proportional voltage signal.
|
|
|
|
|
Kistler
Single Range Charge Amplifer, Type 5014A...
A simple to use single range, line powered
charge amplifier that converts the charge signal from a high impedance piezoelectric force, pressure or acceleration type
sensor into a high level output voltage.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kistler
Charge Amplifier, Type 5050A
A signal processing device that converts the charge signal
from a high impedance piezoelectric sensor into a voltage signal at a low impedance level.
|
|
|
|
|
|
|
|
|
|
|
Kistler
Piezotron Coupler, Type 5114
A
self contained power source that provides excitation power
and acts as an interface between voltage mode piezoelectric
sensors and measuring instruments.
|
|
|
|
|
Kistler
Piezotron Coupler, Type 5118B...
A flexible, simple to use signal conditioner that provides
excitation power, signal tailoring and acts as an interface between voltage mode piezoelectric sensors and measuring
instruments.
|
|
|
|
|
Kistler
Piezotron Coupler, Type 5134A...
A flexible, simple to use signal conditioner
that provides excitation power, signal tailoring and acts as an interface between voltage mode piezoelectric and measuring
instruments.
|
|
|
|
|
|
|
|
Kistler
Piezotron Coupler, Type 5148
A
simple to use, 16 channel, rack mountable signal conditioner
that provides excitation power and acts as an interface
between voltage mode piezoelectric sensors and measuring
instruments.
|
|
|
|
|
|
|
|
|
|
|
Kistler
Multi-Channel Amplifier, Type 5155A...
The purpose of the multi-channel
charge amplifier Type 5155A with 1, 2 or 4 channels is to convert the charge signal from piezoelectric sensors or the signal from
thermocouples into a proportional voltage signal. This amplifier has been developed for industrial applications, in particular
for injection molding machines.
|
|
Kistler
K-Beam® Power Supply, Type 5210
A convenient, simple to use power supply that provides an
interface between capacitive accelerometers and measuring instruments. A single channel unit powered by an internal 9 volt
battery or and AC/DC adapter.
|
|
|
|
|
Kistler
Remote Control Box, Type 5663
Remote control box to be used with the charge
amplifiers Type 5006/7/8/9, the control unit for measuring installations Type 5675 and measuring systems assembled with
them.
|
|
|
|
|
|
|
|
|
|
|
