Automotive,Load,Cells,Lebow,Products,Inc

Automotive Load Cells
from Lebow Products Inc.

 

  Our Products

 Instrumentation
 Monitoring/Display
 Signal Conditioning


 Stress Analysis
 Strain Gauges


 Transducers
 Load/Torque Cells
 Displacement
 Pressure

 Data Acquisition

 Vibration
 Accelerometers
 Analysis


 Physical Testing
 Material/Composite
 Fatigue/Durability
 Physical


 Environmental Test
 

 



      
  Our Manufacturers
 Ashcroft
 Calex
 Capacitec
 Celesco
 Data Track
 Doric
 Ectron
 GP:50
 Honeywell
 Kaman
 Kistler
 Lebow Products
 Michigan Scientific
 Morehouse
 Non-Linear Devices
 Revere Transducers
 Sensortronics
 Strainsert
 Tedea-Huntleigh
 Tovey
 Trans-Tek
 Unipulse
 Vishay Measurements
 Group
 
  Automotive Load Cells from Lebow Products
Model 3419
Automotive Load Cells from Lebow Products Inc.

The Lebow Seat Belt Sensor features improved accuracy. Calibration is essentially independent of belt thickness, which may change under load. It’s so simple to install. Just remove the pin, lay the belt on the transducer and replace the pin.

It provides excellent repeatability without the need for the extensive belt wrap required on previous models.

- Small size
- Installs without “threading”
- Low sensitivity to belt thickness change
- 3500 lb.


 
Model 3663
Automotive Load Cells from Lebow Products Inc.

The Lebow Pedal Pressure Sensor mounts directly to the brake pedal with its own mounting clamp. Load applied up to 1/2 inch off center, produces less than a 0.5% error. Standard capacity is 300 lbs. This load cell, which is used for brake pedal force measurements by the automotive industry, finds many production applications. It adapts to any of the pedal or bar operated devices used in all production facilities.

- Low off center loading error
- Easy mounting
- Rugged load surface
- 50, 100, 200, 300 lb.


 
Model 3663-111
Automotive Load Cells from Lebow Products Inc.

The Lebow Pedal Pressure Sensor mounts directly to the brake pedal with its own mounting clamp. Load applied up to 1/2 inch off center, produces less than a 0.5% error. Standard capacity is 300 lbs. This load cell, which is used for brake pedal force measurements by the automotive industry, finds many production applications. It adapts to any of the pedal or bar operated devices used in all production facilities.

- Low off center loading error
- Easy mounting
- Rugged load surface
- 50, 100, 200, 300 lb.


 
 

Automotive Load Cells
from Lebow Products Inc.