Model 3711
|
Bolt
Force Sensor Load Cell
Lebow Model 3711
The Bolt Force Sensor is another unique transducer
from Lebow which is essentially a hollow-compression
strain gage load cell. It is designed to be used
with most strain gage indicators.
The Bolt Force Sensor is a three-piece assembly
consisting of:
1. A large hardened and ground flat washer with
one side beveled.
2. The sensor
3. A small hardened and ground washer
Features:
- Compact
- High output
- Standard models for bolts size no. 6 through 2"and
up to 20mm
- Sensor and washers–carpenter 440C stainless
steel, hardness
Rc 58-60
- Sensitive to neither bolt or nut applied torque
Consult Intertechnology Inc. for Capacities
|
|
Model 3714
|
Bolt
Force Sensor Load Cell
Lebow Model 3714
The Bolt Force
Sensor is another unique transducer from Lebow which
is essentially a hollow-compression strain gage
load cell. It is designed to be used with most strain
gage indicators.
The Bolt Force Sensor is a three-piece assembly
consisting of:
1. A large hardened and ground flat washer with
one side beveled.
2. The sensor
3. A small hardened and ground washer
Features:
- Compact
- High output
- Standard models for bolts size no. 6 through 2"and
up to 20mm
- Sensor and washers–carpenter 440C stainless
steel, hardness
Rc 58-60
- Sensitive to neither bolt or nut applied torque
Consult Intertechnology Inc. for Capacities
|
|
Model 3718
|
Bolt
Force Sensor Load Cell
Lebow Model 3718
The Bolt Force Sensor is another unique transducer
from Lebow which is essentially a hollow-compression
strain gage load cell. It is designed to be used
with most strain gage indicators.
The Bolt Force Sensor is a three-piece assembly
consisting of:
1. A large hardened and ground flat washer with
one side beveled.
2. The sensor
3. A small hardened and ground washer
Features:
- Compact
- High output
- Standard models for bolts size no. 6 through 2"and
up to 20mm
- Sensor and washers–carpenter 440C stainless
steel, hardness
Rc 58-60
- Sensitive to neither bolt or nut applied torque
Consult Intertechnology Inc. for Capacities
|
|
Model 3719
|
Bolt
Force Sensor Load Cell
Lebow Model 3719
The Bolt Force Sensor is another unique transducer
from Lebow which is essentially a hollow-compression
strain gage load cell. It is designed to be used
with most strain gage indicators.
The Bolt Force Sensor is a three-piece assembly
consisting of:
1. A large hardened and ground flat washer with
one side beveled.
2. The sensor
3. A small hardened and ground washer
Features:
- Compact
- High output
- Standard models for bolts size no. 6 through 2"and
up to 20mm
- Sensor and washers–carpenter 440C stainless
steel, hardness
Rc 58-60
- Sensitive to neither bolt or nut applied torque
Consult Intertechnology Inc. for Capacities
|
|
