Model 3603
|
Compression
Load Cell
Lebow Model 3603
The Compression only Load Cell was developed by
Lebow engineers to deliver a high degree of performance
at low cost and low deflection.
These designs handle a full range of compression
loads including press calibration, weighing tube
mills, extruding processes and roling and reduction
mills.
100K, 200K, 300K, 500K lb.
|
|
Model 3644
|
Compression
Load Cell
Lebow Model 3644
The Compression only Load Cell was developed by
Lebow engineers to deliver a high degree of performance
at low cost and low deflection.
These designs handle a full range of compression
loads including press calibration, weighing tube
mills, extruding processes and roling and reduction
mills.
1,000K lb.
|
|
Model 3674
|
Compression
Load Cells
Lebow Model 3674
The Compression only Load Cell was developed by
Lebow engineers to deliver a high degree of performance
at low cost and low deflection.
These designs handle a full range of compression
loads including press calibration, weighing tube
mills, extruding processes and roling and reduction
mills.
5K, 10K, 20K, 50K lb.
|
|
Model 3691
|
Compression
Load Cell
Lebow Model 3691
The Compression only Load Cell was developed by
Lebow engineers to deliver a high degree of performance
at low cost and low deflection.
These designs handle a full range of compression
loads including press calibration, weighing tube
mills, extruding processes and roling and reduction
mills.
1K, 2K, 5K, 7.5K, 10K lb.
|
|
Model 3310
|
Compression
Load Cell
Lebow Model 3310
Compression Load Cell Model 3310 is a low profile
bending ring load cell designed for high-capacity
weighing applications, including weigh-bridges,
tanks, silos and high capacity platform scales as
well as force measurement.
Its small physical size, combined with high accuracy
and low cost, makes this load cell ideally suited
for modern, low-profile designs in both approved
applicaitons and process weighing.
5,000, 10,000, 20,000, 30,000 lb.
|
|
|
