Model 6214-111
|
Load
Cell Overload Protector
Lebow Model 6214-111
The Lebow Load Cell Overload Protector is available
in sizes that will accommodate load cells with capacities
up to 3,000 lbs. and overloads to 15,000 lbs. in
tension and 20,000 lbs. compression.
The Lebow Load Cell Overload Protector is available
with an optional end plate assembly and rod ends.
The Overload Protector eliminates downtime and replacement
costs due to damaged strain gage load cells. The
unit does not appreciably affect the cell’s
dynamic response. Up to its set point (usually 110%),
the application of load results in linear deflection
of the system. At 110% of rated load, the patented
non-linear spring supporting the cell abruptly collapses,
shunting the load in excess of 110% to the built-in
mechanical stops.
When the load is removed, the springs automatically
return to their original position. The low spring
rate, above rated load, allows wide tolerances in
mechanical stop settings.
100, 200, 300 lb.
|
|
Model 6214-112
|
Load
Cell Overload Protector
Lebow Model 6214-112
(See description above)
500, 1K, 2K, 3K lb.
|
|
Model 6214-121
|
Load
Cell Overload Protector
Lebow Model 6214-121
(See description above)
100, 200, 300 lb.
|
|
Model 6214-122
|
Load
Cell Overload Protector
Lebow Model 6214-122
(See description above)
500, 1K, 2K, 3K lb.
|
|
Model 6214-131
|
Load
Cell Overload Protector
Lebow Model 6214-131
(See description above)
500, 1K, 2K, 3K lb.
|
|
Model 6214-132
|
Load
Cell Overload Protector
Lebow Model 6214-132
(See description above)
500, 1K, 2K, 3K lb.
|
|
|
