The F395 Dynamic Force Processor is designed
for control of the forces and displacements that assure the quality on an automated production line to meet all defined production
requirements. The F395 can control any processes where precisely defined functional relationships between two variables can be
demonstrated. Application examples include: Press Fitting, Injection Molding, Capping, Riveting or Torque Control, etc.
The F395 reacts to variations in user-defined waveforms,
the pre-stored tolerances are used as references to the
curves generated in the automated production process.
The F395 will reject any failures and store the defective
curves for analysis and process improvement. Comparisons
made between production curves and known acceptable values
can use a wide variety of testing parameters, Multi-Hold
(Sample, Peak, Valley, Auto-inflection), Hysteresis, etc.
The F395 receives inputs from various sensors such as load,
pressure, torque, acceleration, displacement, pulse or any sensors that converts sensed values into voltage/current signals.
Dynamic Force Processor Unipulse
Model F395
|
